Prof. Dr. Metin Gürü

Mühendislik Fakültesi > Kimya Mühendisliği

 

YAYINLAR:

Uluslar arası (SCI) dergilerde yayınlanan makaleler:

1. Çakanyıldırım Ç, Gürü M, Decomposition of NaBH4 with self-regeneration of carbon supported CoCl2 catalyst, Int J of Green Energy, inpress.
2. İçen H, Gürü M, Determination Of Mass Transfer Coefficients On The Obtaining of Caffeine From Tea Stalk by Supercritical Carbon Dioxide With And Without Ethanol DOI: 10.1007/s13369-017-2684-y, AJSE, baskıda
3. Aktaş AR, Aktaş G, Gürü M, “MODELLING OF HIGH ENERGY IMPACTED BALL MILLING AND BALL MOTION BY FINITE ELEMENT ANALYSIS, GUJS, 30(2), 187-194, 2017.
4. Aydın DY, Gürü M, Saçak D, Özyürek M, Synthesis and Characterization of Zinc Fluoroborate from Zinc Fluoride and Boron by Mechanochemical Reaction, AJSE, 42(10), 4409–4416, 2017.
5. Gürü M, Gökdai D, Toğrul T, A New Approach To The Manufacturing Of Elemental Boron From Boron Oxide By Carbon Monoxide, Int J of Hydrogen Energy, 42, 18028-18033, 2017.
6. Boynuegri TA, Gürü M, “Catalytic Dehydrogenation of Calcium Borohydride by Using Hydrogel Catalyst, International Journal of Hydrogen Energy, 42, 17869-17873, 2017.
7. Levent Nuralın, Ayşe Tosun, Fatma Erol, Betül Durmaz, Sümeyye Caner, Metin Gürü, Optimisation of quercetin amount via response surface methodology for elaeagnus seeds by supercritical CO2 extraction method, Journal of the Faculty of Engineering and Architecture of Gazi University, baskıda.
8. Bilen M, Gürü M, Çakanyıldırım Ç, Conversion of KCl into KBH4 by Mechano-Chemical Reaction and its Catalytic Decomposition, Journal of Electronic Materials, 46(7), 4126-4132, 2017.
9. Sozen, Adnan; Variyenli, H. Ibrahim; Ozdemir, M. Bahadir; Gürü M, UPGRADING THE THERMAL PERFORMANCE OF PARALLEL AND CROSS-FLOW CONCENTRIC TUBE HEAT EXCHANGERS USING MgO NANO-FLUID, Heat Transfer Research, 48(5), 419-434, 2017.
10. M. Yıldırım, D. Özyürek, M. Gürü, “Effect of Sintering Time on Hardness and Wear Behaviours of Carbon Nanotubes Reinforced Aluminium Matrix Composites”, Acta Physica Polonica A, 131(1), 92-95, 2017. 
11. Şahin A, Taşdemir HM, Karbulut A, Gürü M, MECHANICAL AND THERMAL PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM WASTE PEACHNUT SHELL WITH GLASS POWDER, Arab J Sci Eng, 42(4), 1559-1568 2017.
12. Gürü M, Çubuk MK, Arslan D, Sina Aminbakhsh, “Effects of sugar beet molasses and molasses based boron oxide compound on bitumen properties” Journal of Materials in Civil Engineering, 29(4), 04016252, 2017.
13. GÜRÜ, M., SÖZEN, A., MENLİK, T., AKTAŞ, M., Utilization of Blast Furnace Slag Nano-fluids In Two-Phase Closed Thermo-Syphon Heat Pipes for Enhancing Heat Transfer, Experimental Heat Transfer, 30(2), 112-125, 2017.
14. SÖZEN, A., MENLİK, T., GÜRÜ, M., AKTAŞ, M., Upgrading of the Thermal Performance of Two-Phase Closed Thermosyphon (TPCT) Using Fusel Oil, Heat and Mass Transfer, 53(1),141-149, 2017
15. Çelik M., Yücesu HS., Gürü M, INVESTIGATION OF THE EFFECTS OF ORGANIC BASED MANGANESE ADDITION TO BIODIESEL ON COMBUSTION AND EXHAUST EMISSIONS, Fuel Processing Technology, 152, 83-92, 2016.
16. Gürü M, Keskin A, "Evaluation of Biodiesel Production, Engine Performance and Emissions", Journal of Electronic Materials, 45 (8), pp. 3882-3888, 2016.
17. M. Yıldırım, D. Özyürek, M. Gürü, “Investigation of Microstructure and Wear Behaviours of Al Matrix Composites Reinforced by Carbon Nanotube”, Fullerenes Nanotubes and Carbon Nanostructures, 24 (7), pp. 467-473 (2016)..
18. Akkaş Boynueğri T, Karabulut AF, Gürü M, “Synthesis of Borohydride and Catalytic Dehydrogenation by Hydrogel Based Catalyst", Journal of Electronic Materials, 45 (8), 3949-3956, 2016.
19. Karabulut AF, Akkaş Boynueğri T, Gürü M, Aydın MY, “SYNTHESIS of Ca(BH4)2 from SYNTHETIC COLEMANITE by MECHANOCHEMICAL REACTION", Journal of Electronic Materials, 45 (8), 3957-3963, 2016
20. Duygu Gökdai, Metin Gürü, Taner Toğrul, "Mekanokimyasal yöntemle bor oksitten elementel bor sentezlenmesi ve karakterizasyonu", Journal of the Faculty of Engineering and Architecture of Gazi University, 31(2), 425-433, 2016.
21. MUSA YILDIRIM, Dursun Özyürek, Metin Gürü, The Effects of Precipitate Size on the Hardness and Wear Behaviors of Aged 7075 Aluminum Alloys Produced by Powder Metallurgy Route, Arab J Sci Eng   41:4273–4281, 2016.
22. Sözen A., Varyenli İ, Özdemir H.İ, Bahadır M, Gürü M, Improving the Thermal Performance of Parallel and Cross-Flow Concentric Tube Heat Exchangers Using Fly-Ash Nanofluid, Heat Transfer Engineering, 37(9), 805-813, 2016.
23. SÖZEN, A., MENLİK, T., GÜRÜ, M., BORAN, K., KILIÇ, F., AKTAŞ, M., ÇAKIR, M.T., A Comparative Investigation on The Effect Of Fly-Ash And Alumina Nanofluids on The Thermal Performance Of Two-Phase Closed Thermo-Syphon Heat Pipes, Applied Thermal Engineering,96, 330-337, 2016. 
24. Gülsün Aktaş, Ali Rıza Aktaş, Metin Gürü, Boya özelliklerinin radar absorpsiyon kapasitesine etkisi, Journal of the Faculty of Engineering and Architecture of Gazi University, 31(1), 87-93, 2016.
25. Sözen A., Variyenli İ., Özdemir B., Gürü M, Aytaç İ., Heat transfer enhancement using alumina and fly ash nanofluids in parallel and cross flow concentric tube heat exchangers, Journal of Energy Institute, 89(3), 414-424, 2016.
26. Sozen A., Variyenli İ., Özdemir B., Gürü M., Improving the thermal performans of parallel cross flow concentric tube heat exchangers using fly ash nanofluid, Heat Transfer Engineering, 37(9), 805-813, 2016.
27. Adnan Sözen, Tayfun Menlik, Metin Gürü ve arkadaşları, UTILIZATION OF FLY-ASH NANOFLUIDS IN TWO-PHASE CLOSED THERMOSYPHON (TPCT) FOR ENHANCING HEAT TRANSFER, Experimental Heat Transfer, 29 (3), 337-354, 2016.
28. M.Küçüktüvek, H.Keskin, M.Gürü, The potential of poppy (papaver somniferum linnaeus) husk for manufacturing wood-based particleboards, Construction & Building Materials, 95: 224-231, 2015.
29. M.Bilen, O.Yılmaz, M.Gürü,  Synthesis of LiBH4 from LiBO2 as hydrogen carrier and its catalytic dehydrogenation, Int J of Hydrogen Energy, 40; 15213-15217, 2015.
30. Çetin ÇAKANYILDIRIM, Metin GÜRÜ, Alternative energy storage key component trimethylborate: Synthesis, dehydration and kinetic parameters, J of Thermal Science and Technology, 35(1), 53-58, April 2015.
31. Tugba Çelik, Metin Gürü, Extraction of oil and silybin compounds from milk thistle seeds using supercritical carbon dioxide, Supercritical Fluids, 100(3255): 105-109, 2015.
32. Orhan Yılmaz, Murat Bilen, Metin Gürü, Absorption of combustion gases in boron solutions and recovery as industrial products, Int J of Hydrogen Energy, 40; 15352-15357, 2015.
33. Tayfun Menlik, Adnan Sözen, Metin Gürü, Sinan Öztaş, HEAT TRANSFER ENHANCEMENT USING MgO/WATER NANOFLUID IN HEAT PIPE, Journal of the Energy Institute, 88:247-257, 2015.
34. Metin Gürü, Ahmet F. Karabulut, M.Yasir Aydın, İbrahim Bilici, Processing of Fireproof and High Temperature Durable Particleboard from Rice Husk, High Temperature Materials and Processes, 34(6); 599-604, 2015.
35. Ergun G, Gürü M. Eğilmez F, Çekiç-Nagaş I, Yılmaz D, Effects of fly ash and boric acid on Y2O3-stabilized tetragonal ZrO2 dispersed with MgAl2O4: An experimental study on rut subcutaneous, Annals of Anatomy, 199: 23-29, 2015. 
36. Metin Gürü, Seyyed Ali Ferzanian, Deniz Arslan, İbrahim Bilici, An Approach to the Usage of Polyethylene Terephthalate (PET) Waste as Roadway Pavement Material, J of Hazardous Materials, 279, 302-310, 2014.
37. Çubuk, M., Gürü, M., Ugurlu, E. L. Cleaning up oil spills on water surface with wastes of granular styrofoam, tea fibers and polystyrene foam, Journal of the Faculty of Engineering and Architecture of Gazi University, 29(2), 281-287, 2014.
38. Güldaş A, Çankaya A, Güllü A, Gürü M, Determination of rheological properties of zinc borate reinforced polypropylene, Journal of the Faculty of Engineering and Architecture of Gazi University, 29(2), 227-234, 2014.
39. Adnan SÖZEN, Engin ÖZBAŞ, Tayfun MENLİK M.Tarık ÇAKIR, Metin GÜRÜ, Kurtuluş BORAN, Improving the Thermal Performance of Diffusion Absorption Refrigeration System with Alumina Nanofluids: An Experimental Study, Int. J of Refrigeriation, 44, 73-80, 2014.
40. Mustafa Serhat Ekinci, Metin Gürü, Extraction of oil and <beta>-sitosterol from peach (Prunus persica) seeds using supercritical carbon dioxide, Journal of Supercritical Fluids, 92, 319-323, 2014.
41. Deniz Arslan, M.Gürü, M.K.Çubuk, Preventing of rutting and crackings in the bituminous mixtures by monoethylene and diethylene glycol based synthetic polyboron compounds Construction & Building Materials, 50, 102-107, 2014
42. M.Çubuk, M.Gürü, M.K.Çubuk, D.Arslan, “Rheological properties and performance evaluation of phenol formaldehyde modified bitumen“, J of Materials in Civil Engineering, 26(6) 2014.
43. Ganime Tuğba ERCOŞKUN, Ali KESKİN, Metin GÜRÜ, Duran ALTIPARMAK Çift oluklu parabolik oluk tipi güneş kollektörünün tasarımı, imalatı ve performansının incelenmesi, Journal of the Faculty of Engineering and Architecture of Gazi University, 28(4), 855-863, 2013.
44. Duygu Arslan, M.Gürü, Mekanokimyasal yöntemle borkürbür sentezi ve alüminyum matrisli kompozit malzemede kullanılabilirliğin incelenmesi, Journal of the Faculty of Engineering and Architecture of Gazi University, 28(4), 875-883, 2013
45. A. Keskin, K.Ocakoğlu, İ.A. Reşitoğlu, M.Gürü, Titanyum Esaslı Yakıt Katkı Maddesinin Dizel Motor Performans ve Emisyonları Üzerindeki Etkisi, Journal of the Faculty of Engineering and Architecture of Gazi University, 28(3), 671-676, 2013.
46. M.Çubuk, M.Gürü, M.K.Çubuk, D.Arslan, Improvement of Properties of Bitumen by Organic Based Magnesium Additive, Journal of the Faculty of Engineering and Architecture of Gazi University, 28(2), 257-264, 2013.
47. E. Büyükkaya, S. Benli, S. Karaaslan, M.Gürü, Effects of trout-oil methyl ester on a diesel engine performance and emission characteristics, Energy Conversion and Management, 69, 41-48, 2013.
48. Z. Esra Durak, M. Gürü, ALKALEN FOSFATAZ (ALP) ENZİMİNİN ÖZÜTLENMESİ, İNHİBİSYONU VE KİNETİK MODELLENMESİ, Journal of the Faculty of Engineering and Architecture of Gazi University, 28(1), 209-215, 2013.
49. D.Arslan, M.Gürü, K.Çubuk, Improvement of hot mix asphalt performance in cold regions by organic-based synthetic compounds, Cold Regions Science and Technology, 85, 250-255, 2013.
50. Murat Bilen, Metin Gürü, Çetin Çakanyıldırım, “Role of NaCl in NaBH4 production and its hydrolysis” Energy Conversion and Management,  72, 134-140, 2013.
51. D.Arslan, M.Gürü, K.Çubuk Performance Assessment of Organic-Based Synthetic Calcium and Boric Acid Modified Bitumens, Fuel, 102, 766-772, 2012.
52. A. Kapulluoğlu, M. Gürü, Electricity production from geothermal sources by binary system; choosing secondary fluids, International Journal of Exergy, 11(1), 112-118, 2012.  
53. M. İlker ÜNLÜ, Murat BİLEN, Metin GÜRÜ “INVESTIGATION OF BORON AND ARSENIC POLLUTION IN KÜTAHYA–EMET REGION UNDERGROUND WATER SAMPLES” J. Fac. Eng. Archit. Gazi Univ., Vol 26, No 4, 753-760, 2011.
54. Uğur Aydoğan, Murat Bilen, Metin Gürü., “USABILITY OF FLY ASH AND BORIC ACID IN THE PRODUCTION OF ANORTHITE CERAMIC METERIAL” J. Fac. Eng. Archit. Gazi Univ. Vol 26, No 4, 761-769, 2011.
55. D.Arslan, M.Gürü, MK.Çubuk, Improvement of bitumen and bituminious mixtures performance properties with organic based zincphosphate compound, J. Fac. Eng. Archit. Gazi Univ. Vol 27, No 2, 459-466, 2012.
56. Reşitoğlu İ A, Keskin A, M.Gürü, Optimization of the esterification reaction in biodiesel production from trap grease, Energy Sources, Part A, 34:1238-1248, 2012.
57. Çakanyıldırım Ç, M.Gürü, Processing of NaBH4 from Na2B4O7 by mechano-chemical synthesis and its catalytic dehydrogenation, Energy Sources, Part A, 34: 1104-1113, 2012.
58. Gürü, M., A. Kapulluoğlu, Optimization of Electricity Production from Geothermal Sources by Binary System, Energy Sources, Part A, 34, 278-286, 2012.
59. Keskin A, M.Gürü, Effects of ethanol and propanol additions into unleaded gasoline on exhaust and noise emissions of a spark ignition engine, Energy Sources, Part A, 33, 2194-2205, 2011.
60. Metin GÜRÜ, İbrahim BİLİCİ, Deniz ARSLAN, INVESTIGATION OF VISCOSITY OF HEAVY FUEL OIL WITH MANGANESE ADDITIVE AND TEMPERATURE, Journal of the Faculty of Engineering and Architecture of Gazi University, 26(3), 631-634, 2011.
61. Meltem Çubuk, Metin Gürü,M. Kürşat Çubuk The Effect Of Polytetrafluoroethylene On The Rheological Properties Of Bitumen, Journal of the Faculty of Engineering and Architecture of Gazi University, 26(3), 623-630, 2011.
62. İsmet Çelikten ve Metin Gürü, Petrodiesel And Rapeseed Oil Biodiesel With Manganese Based Additive, Journal of the Faculty of Engineering and Architecture of Gazi University, 26(3), 643-648, 2011.  
63. Çakanyıldırım Ç, M.Gürü, Production of NaBH4 from its elements by mechano-chemical reaction and usage in hydrogen recycle, Energy Sources, Part A, 33, 1912-1920, 2011.
64. Deniz Arslan, Metin Gürü, Kürşat Çubuk, Meltem Çubuk, “Improvement of bitumen and bituminious mixtures performances by triethylene glycol based synthetic polyboron”, Construction & Building Materials, 25(10), 3863-3868, 2011.
65. Muzaffer Balbaşı , Ayfer Bartan, İrfan Ar, Metin Gürü, Development of low cost heterogeneous catalysts for biodiesel processes, Energy Sources, Part A, 33  (11), 1035-1047 , 2011.
66. Kaya, S., Gürü, M,  Ar, İ., Synthesis of magnesium borohydride from its elements and usage in hydrogen recycle, Energy Sources, Part A, 33(23):2157-2170, 2011.
67. Ali Keskin, Metin Gürü, Duran Altiparmak, Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine, Energy Conversion and Management, 52(1), 60-65, 2011.
68. Keskin A, M.Gürü, D. Altıparmak, Investigation of performance and emissions characteristics of tall oil biodiesel with Co based additive, Energy Sources Part A, 32(20), 1899-1907, 2010.
69. Metin Gürü, Ali Keskin, Abdulkadir Yasar and Duran Altiparmak, Usage of Methyl Ester of Tall Oil Fatty and Resin Acids as Alternative Diesel Fuel, Energy Conversion and Management, 51, 2863-2868, 2010.
70. İçen, H. & Gürü, M., Effect of ethanol content on supercritical carbon dioxide extraction of caffeine from tea stalk and fiber wastes, J. of Supercritical Fluids, 55(1), 156-160, 2010.
71. Hüseyin Yılmaz Aruntaş, Metin Gürü, Mustafa Dayı, İlker Tekin “Utilization of Waste Marble Dust as an Additive in Cement Production” Material and Design, 31, 4039-4042, 2010.
72. D. Özyürek, S. Tekeli, A. Güral, A. Meyveci, M.Gürü, Effect of Al2O3 amount on microstructure and wear properties of Al-Al2O3 metal matrix composites prepared using mechanical alloying method, Powder Metallurgy and Metal Ceramics, 49 (5-6), 289-294, 2010.
73. Gürü M.,Can Ö., Koca A, Çınar C., Şahin F., Biodiesel production from waste chicken fat based sources and evaluation with Mg based additive in a Diesel engine, Renewable Energy, 35(3), 637-643, 2010.
74. Çakanyıldırım Ç, M.Gürü, Processing of NaBH4 from NaBO2 with MgH2 by ball milling and usage as hydrogen carrier, Renewable Energy, 35, 1895-1899, 2010. 
75. Çakanyıldırım Ç, M.Gürü, Supported CoCl2 catalyst for NaBH4 dehydrogenation, Renewable Energy, 35: 839-844, 2010.
76. İçen, H. & Gürü, M., Extraction of caffeine from tea stalk and fiber wastes using supercritical carbon dioxide, J. of Supercritical Fluids, 50(3), 225-228, 2009.
77. Metin Gürü, Meltem Şahin, Süleyman Tekeli, Hanifi Tokgöz, Production of Polymer Matrix Composite Particleboard from Pistachio Shells and Improvement of Its Fire Resistance by Fly Ash, High Temperature Materials and Processes, 28 (3), 191-195, 2009.
78. Gürü, M., Y. Aruntaş, İ. Bilici, N.Tüzün, “Processing of urea-formaldehyde based particleboard from hazelnut shell and improvement of its fire and water resistance" J of Fire and Materials, 33: 413-419, 2009.
79. Çakanyıldırım Ç, M.Gürü, Production of NaBH4 and Hydrogen Release with Catalyst, Renewable Energy, 34(11), 2362-9, 2009.
80. Çubuk, M., Gürü, M., Çubuk, M.K., “Improvement of bitumen performance with epoxy resin”, Fuel, 88, 1324-1328, 2009.
81. M. Gürü, B.D. Artukoğlu, A. Keskin, A. Koca, “Biodiesel production from waste animal fat and improvement of its characteristics by synthesized nickel and magnesium additive" Energy Conversion and Management, 50(3), 498-502, 2009.
82. Çaynak S, Gürü M; Biçer, A, Keskin A, Içingür Y. “Biodiesel production from pomace oil and improvement of its properties with synthetic manganese additive”, Fuel, 88(3), 532-536, 2009.
83. Demirel G.B., T. Çaykara, M. Demiray, M. Gürü, “Effect of Pore-Forming Agent Type on Swelling Properties of Macroporous Poly(N-[3-(dimethylaminopropyl)]methacrylamide-co-acrylamide) Hydrogels”, Journal of Macromolecular Science, Part A:Pure and Applied Chemistry, 46,1-7, 2009.
84. Engin B., M. Gürü and A. Alıcılar “Removal of Ferrous Iron in Synthetic Waters by Catalytic Air Oxidation”, Asian J. Chem., 21(3), 2067-2071, 2009.
85. M. Gürü, S. Tekeli, Ç. Çakanyıldırım, C. Cabbar, Processing of Cer-Met Composite Material from Zn and B2O3, High Temperature Materials and Processes, 27(4), 243-248, 2008.
86. Keskin A., M. Gürü, D. Altıparmak, “Influence of Tall Oil Biodiesel with Mg and Mo Based Fuel Additives on Diesel Engine Performance and Emission”, Bioresource Technology, 99(14), 6434-6438, 2008.
87. Çetin Çakanyıldırım, Metin Gürü, “Processing of LiBH4 from its elements by ball milling method” Renewable Energy, 33(11), 2388-2392, 2008.
88. Metin Gürü, Duygu Venedik, Ayşe Murathan, “Removal of trivalent chromium from water using low cost natural diatomite”, Hazardous Material, 160(2-3), pp.318-323, 2008.
89. Tekeli, S., A.Kayış, M.Gürü, ‘Microstructural, Mechanical and Electrical Properties of Alumina Doped Cubic Zırconia (c-ZrO2)’, Journal of solid state electrochem. 12(7-8),791-797, 2008.
90. Çetin Çakanyıldırım, Metin Gürü, “Hydrogen cycle with sodium borohydride” Hydrogen Energy, 33(17), 4634-4639, 2008.
91. S.Tekeli and M.Guru,.”Microstructural Design and High Temperature Tensile Deformation Behaviour of 8 Mol% Yttria Stabilized Cubic Zirconia (8YCSZ) with SiO2 Additions", Ceramics International, 34(1),137-140,  2008. 
92. Metin Gürü, A. Murathan, N. Tüzün, A. Asan, T. Kıyak, “Oxidative desulfurization of Çayırhan lignites by permanganate solution”, Energy Sources Part A, 30(16), 1508-1515, 2008.
93. Keskin A., M. Gürü, D. Altıparmak and K. Aydın, “Using of cotton oil biodiesel-diesel fuel blends as alternative diesel fuel”, Renewable Energy, 33(4), 553-557, 2008.
94. Metin Gürü, B. Volkan Sarıöz, Çetin Çakanyıldırım, “Oxidative desulfurization of Tufanbeyli coal by hydrogen peroxide solution”, Energy Sources Part A, 30(11), pp. 981-987, 2008. 
95. Gürü, M., M. Atar, R. Yıldırım, Production of polymer matrix composite particleboard from walnut shell and improvement of its requirements, Material and Design, 29, 284-287, 2008. 
96. Mehmet Emin Argun, Sukru Dursun, Mustafa Karatas, Metin Gürü, Activation of pine cone using Fenton oxidation for Cd(II) and Pb(II) removal, Bioresource Technology, 99(18), 8691-8699, 2008.
97. Özgecan Barlay Ergu, Metin Gürü, Canan Cabbar, Preparation and characterization of alumina-zirconia composite material with different acid ratios by the sol-gel method, Central European Journal of Chemistry, 6(3),482-487, 2008. 
98. S.Tekeli, M.Gürü, O.E.Sağlam, Densification and grain-growth behavior of various amounts of SiO2 doped 8YSCZ/SiO2 composites, Materials and Manufacturing  Processes, 22: 1-5, 2007.
99. Ali Keskin, Metin Gürü, Duran Altıparmak, “Biodiesel production from tall oil with synthesized Mn and Ni based additives on fuel consumption and emissions”, Fuel, Vol 86/7-8 pp 1139-1143, 2007.
100. Tekeli S, A. Güral, M. Gürü, “Influence of Tempering Temperature and Microstructure on Wear Properties of Low Alloy PM Steel with 1-2 % Ni Addition”, Materials Science Forum, Vols 534-536, 629-632, 2007.
101. Güral, A., S. Tekeli, D. Özyürek, M.Gürü, “Effect of Repeated Quenching Heat Treatment on Microstucture and Dry Sliding Wear Behavior of Low Carbon PM Steel”, Materials Science Forum, Vols 534-536, 673-676, 2007.
102. Murathan, A., A.S. Murathan, M. Gürü, M. Balbaşı, “Manufacturing low density boards from waste cardboards containing aluminium, Material and Design, 28(7), 2215-2217, 2007.
103. Akyüz, Y., Biçer, A., Gürü, M., Synthesis and processing of Al sheathed MgB2 by powder in tube method and determination of superconducting and mechanical properties, Materials & Design, 28(9), 2500-2504, 2007. 
104. Duran Altıparmak, Ali Keskin, Atilla Koca, Metin Gürü ,“Alternative fuel properties of tall oil fatty acid methyl esters-diesel fuel blends”, Bioresource Technology, Vol. 98, 241-246, 2007. 
105. Nihal Tüzün, Metin Gürü, Yüksel Akyüz, “Comparison of the curing kinetic behavior for two epoxy resin systems containing epikote 828-epikure 3090 and duratek klm 606a -duratek klm 606b”, Polymer Composites, 28(6), 762-770, 2007.
106. Tuncer Çaykara, Şerife Şirin Alaslan, Metin Gürü, Hatice Bodugöz, Olgun Güven, Preparation and characterization of poly(isobutyl methacrylate) microbeads with surface grafted amidoxime groups, Radiation Physics and Chemistry, 76, 1569-1576, 2007.
107. Gürü, M., M. Korçak, S. Tekeli, A. Gürdal, “Processing of Zinc-Based MgAl2O4 composite and Effect of Fly Ash Addition”, J. Key Engineering Materials, Vols.336-338, 1203-1206, 2007.
108. Gürü, M., Y. Akyüz, S. Tekeli, “Synthesis of MgB2 from Anhydrous B2O3 by Ball Milling Method and Determination of Superconductivity Properties”, J. Key Engineering Materials, Vols.336-338, 723-725, 2007.
109. Gürü, M., S. Tekeli, E. Akın, “Manufacturing of Polymer Matrix Composite Material Using Marble Powder and Fly Ash”, J. Key Engineering Materials, Vols.336-338, 1353-1356, 2007.
110. Tekeli, S., M. Gürü, “Indentation Fracture Toughness and Hardness of Solid Oxide Fuel Cell Electrolyte Material”, J. Key Engineering Materials, Vols.336-338, 2418-2421, 2007.
111. Gürü, M., “Oxidative desulfurization of Aşkale coal by nitric acid solution”, Energy Sources Part A, 29(5), 463-469, 2007.
112. Gürü, M., M. Çubuk, Ş.Dursun, A. Demirbaş, “Biodesulfurization of Çayırhan Lignites”, Energy Sources, Part A, 28:559-565, 2006.
113. Gürü M., S. Tekeli, İ. Bilici, “Manufacturing of urea - formaldehyde based composite particleboard from almond shell”, Material & Design, 27, 1148-1151, 2006.
114. Gürü, M., S. Benli, Y. Akyüz, A. Alıcılar, “An Investigation On Kinetics Of Oxalic Acid Synthesis", Cellulose Chemistry & Technology, 39, 1-2, 49-53, 2005.
115. Gürü, M., G. Özkan, A. Murathan, İ. Öksüz, “Effect Of Temperature And Gas Flow Rate on SO2 Sorption in a Reactor with Periodic Liquid Flow And Active Carbon”, Fresenius Environmental Bulletin, 14 (5), 400-405, 2005.
116. Tekeli, S. & M.Gürü, “The Factors Affecting Colloidal Processing Of 8YSCZ Ceramics”, Key Engineering Materials, Vols. 280-283, 729-734, 2005.
117. A.F. Qasrawi, T.S. Kayed, A. Mergen, M. Gürü, Synthesis and characterization of Mg2B2O5, Material Research Bulletin, 40, 583-589, 2005.
118. M. Bilen, A. Mergen, M. Gürü, A. Alıcılar, “Infiltration of Al Alloys into MgAl2O4 under Different Atmospheres”, Key Engineering Materials, June 5th, Vols 264-268, 1795-1798, 2004.
119. A. Mergen, T.S. Kayed, M. Bilen, A.F. Qasrawi, M. Gürü, “Production of Anorthite from Kaolinite and CaCO3 via Colemanite”, Key Engineering Materials, June 5th, Vols 264-268, 1475-1478, 2004.
120. Gürü, M., "Improvement of Adhesion of Bitumen-Aggregate Coatings by Additive", Cell. Chem. & Tech., 38 (1-2), 129-140, 2004.
121. Gürü, M., İçen, H., “Obtaining of caffeine from Turkish tea fiber and stalk wastes”, Bioresource Tech., 94(1), 17-19, 2004.
122. Alıcılar, A., M. Kömürcü and M. Gürü, "The removal of cyanides from water by catalytic air oxidation in a fixed bed reactor", Chemical Engineering and Processing, 41(6): 525-529, 2002.
123. Gürü, M., U. Karakaya, D. Altıparmak, A. Alıcılar, "Improvement of Diesel Fuel Properties by Using Additives", Energy Conversion and Management, 43(8), pp. 1021-1025, 2002.
124. Alıcılar, A., S. Karadavut and M. Gürü, "Air Oxidation of Aqueous Sulphide Solutions in Packed Columns", Fresenius Environmental Bulletin, 10 (7), pp. 620-623, 2001.
125. Gürü, M., V. Pamuk and A. Y. Bilgesü, "Production of Oxalic Acid from Sugar Beet Molasses by Mixed Nitric Acid and Sulphuric Acid", Cellulose Chem. Technol., 36, 1-2, 81-91 (2002).
126. Gürü, M., A. Y. Bilgesü and V. Pamuk, "Production of Oxalic Acid from Sugar Beet Molasses by Formed Nitrogen Oxides", Bioresource Tech., 77, pp. 81-86, 2001.
127. Birey, M., H. Aktaş, A. Alıcılar and M. Gürü, "ESR Spectroscopics Study of Radicals Formed from Methoxycarbonylcholine Picrate Hemihydrate", Radiation Effects and Defects in Solids, 140, 365-371, 1997.
128. Alıcılar, A., M. Doğan and M. Gürü, "Optimization of Double Stage Flash System", International Journal of Energy Research, 19, 169-179, 1995.
 
 

C. Ulusal dergilerde yayınlanan makaleler

  1. Erdem Çiftçi, Adnan Sözen, Metin Gürü, Mert Kılınçel, INVESTIGATION OF THE EFFECTS ON THE THERMAL PERFORMANCE OF THE SiC/WATER NANOFLUID UTILIZATION IN HEAT PIPES, INVENT 2017 2 nd International Conference on Viable Energy Trends, Helsinki/Finland, 28-30 April 2017.
  2. Bilal Canöz, Ayşegül Ülkü Metin, Metin Gürü, “Metal Borides as Energetic Materials”, Uluslararası II. Savunma Sanayileri Sempozyumu, Kırıkkale Üniversitesi, 6-8 Nisan 2017.
  3. M. Yıldırım, D. Özyürek, M. Gürü, “Effect of sintering time on hardness and wear behaviours of carbon nanotubes reinforced aluminium matrix composites”, 6. International Congress in Advances Physics and Materials Science, 01-03 Jun. Istanbul/Turkey, 2016
  4. Duygu Y. Aydın, Dilek Saçak, Metin Gürü, Yaş Yöntemle Çinko Floroborat Sentezi ve Alev Geciktirici Olarak Kullanılabilirliği,  1st International Mediterranean Science and Engineering Congress (IMSEC 2016) Çukurova University, Congress Center, October 26-28, 2016, Adana / TURKEY.    )
  5. Dilek Saçak, Duygu Y. Aydın, Metin Gürü., Mekanokimyasal Yöntemle Bakır Floroborat Sentezi ve Karakterizasyonu, 1st International Mediterranean Science and Engineering Congress (IMSEC 2016) Çukurova University, Congress Center, October 26-28, 2016, Adana / TURKEY.
  6. Duygu Gökdai Metin Gürü Taner Toğrul,    A NEW APPROACH TO THE MANUFACTURING OF ELEMENTAL BORON FROM BORON OXIDE BY CARBON MONOXIDE, ECRES-II İstanbul Ağustos 2016
  7. Tuğba Akkaş Boynueğri Catalytic Dehydrogenation of Calcium Borohydride by Using Hydrogel Catalyst ECRES-II İstanbul Ağustos 2016.
  8. Sinan Öztaş, Metin Gürü, Adnan Sözen, Engin Effect of LiBr Absorbent on Performance of Diffusion Absorption Refrigeration System, ICENES, Ekim 2015, İSTANBUL
  9. Ahmet F. Karabulut, Metin Gürü, Tuğba A. Boynueğri, Mustafa Y. Aydın, SYNTHESIS of Ca(BH4)2 from SYNTHETIC COLEMANITE by MECHANOCHEMICAL REACTION, ECRES, Antalya 7-10 Ekim 2015
  10. Tuğba Akkaş Boynueğri,  Synthesis of Borohydride and Catalytic Dehydrogenation by Hydrogel Based Catalyst, ECRES Özkaymak Oteli ANTALYA, 7-10 Ekim 2015.
  11. Metin Gürü, Evaluation of Biodiesel Production, Engine Performance and Emissions, Davetli Konuşmacı, ECRES Özkaymak Oteli ANTALYA, 7-10 Ekim 2015.
  12. M.Bilen, O.Yılmaz, M.Gürü, SYNTHESIS OF LiBH4 AS HYDROGEN CARRIER AND ITS CATALYTIC DEHYDROGENERATION, IV. International Conference on Nuclear and Renewable Energy Resources, 27-29 Ekim 2014, Antalya-Turkey.
  13.  O.Yılmaz, M. Bilen, M.Gürü, ABSORPTION OF CO2 IN BORON SOLUTIONS AND RECOVERY AS INDUSTRIAL CHEMICAL PRODUCTS, IV. International Conference on Nuclear and Renewable Energy Resources, 27-29 Ekim 2014, Antalya-Turkey.
  14. Hydrolysis of Synthetic KBH4 by CoI2 Catalyst supported on activated carbon, III. International Conference on Nuclear and Renewable Energy Resources, 20-23 May 2012, İstanbul-Turkey.
  15. M.Bilen, M.Gürü, Ç.Çakanyıldırım, Dehydrogenation of Synthetic NaBH4 by the formation of CoI2 Catalyst supported with carbon, III. International Conference on Nuclear and Renewable Energy Resources, 20-23 May 2012, İstanbul-Turkey.
  16. Ekinci, M.S., Gürü, M., Obtaining Of β-Phytosterol From Peach (Prunus Persica) Seed By Supercritical Carbon Dioxide  Extraction, International Congress of Chemical Engineering (ICCE), 2012, 24-27 June, Sevilla, SPAIN
  17. S. Tekeli,A.Akçimen, O.Gürdal, M.Gürü, Effect of Titania (TiO2) amount on the Mechanical and Electrical Properties of Cubic Zirconia (c-ZRO2)/ Titania (TiO2) Composites, Int. Conference on Innovative Technologies, IN-TECH 2011, pp545-548, 1-3.9.2011 Bratislava-Slovakia.
  18. Barış Ayar, Metin Gürü, Çetin Çakanyıldırım, Levent Özmen, Production of Anhydrous Zinc Borate From Zinc and Boron Oxide by Mechanochemical Reaction and Usage as a Flame Retardant in Dye, 17th Int Symposium on Boron, Borides and Related Materials, 11-17 Sept 2011, İstanbul-Turkey.
  19.   Metin Gürü, Ayşe Kapulluoğlu, Electricity Production From Geothermal Sources by Binary System; Choosing Secondary Fluids, The Second Nuclear and Renewable Energy Resources Conference (NURER 2010), Gazi University, 4-7 Temmuz 2010 Gölbaşı-ANKARA.
  20. İsmet Çelikten, Metin Gürü, Improvement Of Performance And Emission Criterias Of Petrodiesel And Rapeseed Oil Biodiesel With Manganese Based Additive, 11. Uluslararası Yanma Sempozyumu, 24 – 27 Haziran 2010, SARAYBOSNA
  21. Metin Gürü, Atilla Koca, Özer Can, Can Çınar, Fatih Şahin, “Mg katkılı hayvansal kökenli biyodizelin Dizel motor performansı ve egzoz emisyonlarına etkilerinin incelenmesi”, 10. Uluslar arası Yanma Sempozyumu, sayfa: 366-370, Sakarya Üniversitesi, 6-10 Ekim 2008, ADAPAZARI
  22. Çubuk, M., Gürü M, Çubuk K, “Uçucu kül ve hurda araç lastiğinin epoksi reçineye dozlanmasıyla bitüm katkı maddesi olarak ekonomiye kazandırılması“, Blacksea international environmental symposium, 24-29 Ağustos 2008, Giresun.
  23. Tekeli, S., A. Kayış, O. Gürdal, M.Gürü,  “Microstructural And Electrical Conductivity Relationships In Alumina-Containing Yttria Stabilized Cubic Zirconia Used As A Solid Electrolyte In Solid Oxide Fuel Cells”, Escola Politecnica da Universidade de Sao Paulo, 3-6 Eylül, Rio, 2007, Rio-Brasil.
  24. Serda Kaya, Metin Gürü, İrfan Ar, “Processing of Mg(BH4)2 from Its Elements and Its Usage in Hydrogen Recycleé, Proceedings International Hydrogen Energy Congress and Exhibition IHEC 2007, Book of Abstracts p. 211, İstanbul-Turkey, 13-15 July 2007.
  25. Serda Kaya, Metin Gürü, İrfan Ar, “Processing of Mg(BH4)2 from Mg and B2O3 by Solid Phase Reaction and Its Usage as Hydrogen Carrier”, Proceedings International Hydrogen Energy Congress and Exhibition IHEC 2007, Book of Abstracts p.243, İstanbul-Turkey, 13-15 July 2007.
  26. Gürü, M., Ç. Çakanyıldırım, S.Tekeli, H.Canan Cabbar, ‘Processing of Cer-Met Composite Material from Zn and B2O3, 3rd China-Europe Symposium on Processing and Properties of Reinforced Polymers, 11-15 Haziran 2007, Budapeşte-MACARİSTAN.
  27. Özgecan Barlay Ergu, H.C Cabbar, M.Gürü, Preparation And Characterization of Alumina-Zirconia Composite Material With Different Acid Ratios By The Sol-Gel Method, 3rd China-Europe Symposium on Processing and Properties of Reinforced Polymers, 11-15 Haziran 2007, Budapeşte-MACARİSTAN
  28. Tekeli, S., T. Boyacıoğlu, M.Gürü, ‘Microstructural, Mechanical and Electrical Properties of Alumina Doped Yttria-Stabilized Cubic Zırconia (c-ZrO2) Used as a Electrolyte For Solid Oxide Fuell Cells (SOFC)’, 4th International Conference on Materials for Advanced Technologies 2007’, 1-6 Temmuz 2007, Singapur.
  29. Çetin Çakanyıldırım, Metin Gürü, Synthesis of LiBH4 and its usability as hydrogen storage, Somer Symposium Series 1 Innovation, Abstract Book p.70, 14-15 Mayıs 2007, METU, ANKARA.
  30. Özyürek, D., Tekeli, S., Güral, A., Meyveci, A.,and Gürü, M., Microstructure and wear properties of alumina-reinforced aluminum composites produced by mechanical alloying method, International Meeting on Materials for Electronic Applications” IMMEA 2007 Abstract Book s.145, 30 Nisan-2 Mayıs 2007, Fas Marrakech.
  31. Tekeli, S., M. Gürü, T. Boyacıoğlu, “Microstructure-Property relationship of c-ZrO2/SiO2 composites with various amounts of SiO2 additions”, Recent Advances in Composite Materials, 20-23 Feb 2007, pp 534-540, New Delhi, India.
  32. M. Gürü, B. Ayar, Ç. Çakanyıldırım, M. Bilen, Synthesis and Characterization of Zinc Borate Pigment Resistant to Corrosion and Stable at High Temperatures, 17th International Congress of Chemical and Process Engineering, 27-31 August 2006, Prague-Czech Republic.
  33. Güral, A., Tekeli S., Özyürek D., Gürü M., “A Study on dry sliding wear behaviour of sintered 3Si-2Ni and 3Si-2Mn PM steels with various graphite content”, The 7th Int. Conference of the Egyptian Society of Tribology, 27-28 Dec 2006 Fac. of Eng. Cairo University, EGYPT.
  34. S. Tekeli, A.Akçimen, M.Gürü, O.Gürdal, “Effect of TiO2 addition on phase stability and electrical conductivity of cubic zirconia used as an electrolyte in solid oxide fuel cells”, 210. Elektrokimya Kongresi, 28 ekim-3 kasım 2006, ECS Transactions, 3(9), 189-196 Cancun, Meksika.
  35. S.Tekeli, M.Gürü, O.E.Sağlam, Densification and grain growth behaviour of various amounts of SiO2 doped 8YSCZ/SiO2 composites, ACUN-5, International composites conference, Developments in comosites: Advanced, infrastructural, natural and nano-composites, Sydney, Australia 11-14 July, 2006
  36. Süleyman Tekeli, Ahmet Güral and Metin Gürü, Influence of tempering temperature and microstructure on wear properties of low alloy PM steel with 1-2 % Ni addition, 2006 Powder Metallurgy World congress and exhibition, Busan, Korea 24-28 September 2006. 
  37. Ahmet Güral, Süleyman Tekeli, Dursun Özyürek and Metin Gürü, Effect of repeated quenching heat treatment on microstructure and dry sliding wear behaviour of low carbon PM steel, 2006 Powder Metallurgy World congress and exhibition, Busan, Korea 24-28 September 2006.
  38. M.Gürü, S.Tekeli, İ.Bilici, A.Güral and A.R.Karagöz, Production of Ti-Fe based MgAl2O4 composite maberial by pressureless infiltration method, MCM-2006 International conference on Mechanics of composite materials, Riga, Latvia, May 29-June 2, 2006.
  39. S.Tekeli, M.Gürü, Effect of isothermal annealing on static grain growth behaviour of 8YSCZ ceramics with SiO2 addition, International conference on advances in materials and processing technology (AMPT-2006), Lasvegas, USA, July-30-August 3, 2006.
  40. Süleyman Tekeli, Ahmet Güral and Metin Gürü, Effect of Ni content on dry sliding wear behaviour of sintered low carbon PM steel, 1st International Conference on Manufacturing and Material Processing, Kuala Lumpur, Malaysia, 14-16 March, 2006.
  41. Tekeli, S., M. Gürü, “Effect of Various Amount of Al2O3 Addition on the Flexural Strength, Fracture Toughness and Hardness of c-ZrO2/Al2O3 Composites Used as an Electrolyte for Solid Oxide Fuel Cell”, Materials Science & Technology, September 25-28, 2005, Pittsburgh, PA.
  42. Güral, A., S. Tekeli, M. Gürü, “Effect of Different Heat Treatments on Microstructure of Ni Added Steels Produced by P/M Method”, EURO PM2005, 2-5 October 2005, Prague, Czech Republic.
  43. Gürü, M., S. Tekeli, “Production of Urea-Formaldehyde Based Composite Particle Board From Apricot Shell with Fly Ash  Addition as a Flame Retardant”, ICCE-12 Twelfth annual international  conference on composites/nano engineering, University of New Orleans, 1-6 August 2005, Tenerife, Canary Islands, Spain.
  44. Akyüz, Y., A. Biçer, M. Gürü, “Preparation of MgB2/Al superconducting tape”, 7th World Congress of Chemical Engineering, 10-14 July 2005, Glasgow-UK.
  45. Gürü, M., S. Tekeli, M.K. Çubuk, M. Çubuk,  “Recycling Of Scrap Vehicle Tyre As Elastic Surface Materials”, The First Jordanian International Conference of Material Science and Engineering, 3-5 May 2005, Al-Balqa University, Al-Salt, Jordan.
  46. Gürü, M., “Seçici Yükseltgen Madde Permanganat Çözeltisiyle Kömürün Desülfürizasyonu”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Universitesi-ANKARA.
  47. Duran Altıparmak, Ali Keskin, Metin Gürü, “Ayçiçek yağı metil esterinin dizel motorlarda alternatif olarak kullanımı”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Üniversitesi -ANKARA.
  48. Duran Altıparmak, Ali Keskin, H. Mustafa Yıldırım, Metin Gürü, “Dizel motorlarında fındık yağı metil esterinin alternatif yakıt olarak incelenmesi”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Üniversitesi-ANKARA.
  49. Ali Keskin, Duran Altıparmak, Metin Gürü, “Mısır yağı metil esterinin dizel motorlarda alternatif yakıt olarak kullanımı”, 8. Uluslar arası Yanma Sempozyumu, 8-9 Eylül 2004, Gazi Üniversitesi-ANKARA.
  50. Mergen, A., M. Bilen, M. Gürü, "MgAl2O4 Spinel Fazının Sıvı Alüminyum Metali ile Etkileşimi", International Powder Metallurgy Conference, 4-6 September 2002, Gazi Üniversitesi-ANKARA.
  51. Gürü, M., A. Murathan, A. Alıcılar, Ş.Dursun, "Yakıt Püskürtmeli Güç Santrallerinde Yanma Sorunları ve Çözümleri", 7th International Combustion Symposium, 17-18 July 2002, Gazi University-ANKARA.
  52. Çubuk, M, M. Gürü, A. Alıcılar, "Kömürdeki Yanabilir Kükürdün Giderilmesinde Thiobacillus Mikroorganizmalarının Etkinliği", 7th International Combustion Symposium, 17-18 July 2002, Gazi University-ANKARA.
  53. Dursun, Ş., M. Gürü, A. Murathan, "Effects of  SO3 Formation on the Dew Point", 1 st International Workshop on Environmental Quality and Environmental Engineering in the Middle East Region, 5-7 October 1998, Selçuk University, Konya.
 

Ulusal toplantılarda sunulan ve basılan bildiriler:

  1. Erdem ÇİFTÇİ, Adnan SÖZEN, Tayfun MENLİK, Metin GÜRÜ, FÜZEL YAĞI KULLANILARAK ISI BORUSU PERFORMANSININ İYİLEŞTİRİLMESİ, 3. ANADOLU ENERJİ SEMPOZYUMU, MUĞLA SITKI KOÇMAN ÜNİVERSİTESİ, 1-3 EKİM 2015
  2. D.Aydın, M.Gürü,  “Mekanokimyasal Yöntemle Çinko Floroborat Sentezi ve Karakterizasyon Çalışmaları”, 27.Kimya Kongresi, 18 Mart Üniversitesi, Çanakkale, 24-29 Ağustos 2015.
  3. Metin GÜRÜ, Ali Rıza AKTAŞ, Gülsün AKTAŞ, SPEX ÖĞÜTÜCÜ/ KARIŞTIRICI’NIN ANSYS PROGRAMI KULLANILARAK SONLU ELEMANLAR YÖNTEMİYLE ANALİZİ, IV. İleri Teknolojiler Çalıştayı, Bahçeşehir Üniversitesi, 14-17 Ekim 2014.
  4. Metin Gürü, Hatice Tuğba ÇELİK, KEMOTERAPİDE KULLANILAN İLAÇLARIN YAN ETKİLERİNİ AZALTICI YA DA YOK EDİCİ PREPARATLARIN SÜPERKRİTİK CO2 İLE EKSTRAKSİYONU, IV. İleri Teknolojiler Çalıştayı, Bahçeşehir Üniversitesi, 14-17 Ekim 2014.
  5. Hatice Tuğba ÇELİK, Gözde ÇUBUKÇU, Serhat EKİNCİ, Metin GÜRÜ, Cardamomi fructus TOHUMUNUN SÜPERKRİTİK CO2 İLE EKSTRAKSİYONU, UKMK 2014, Osmangazi Üniversitesi, 10-12 Eylül 2014.
  6. Hatice Tuğba ÇELİK, Metin GÜRÜ, Silybum marianum TOHUMUNUN SÜPERKRİTİK CO2 İLE EKSTRAKSİYONUNA ÇALIŞMA PARAMETRELERİNİN ETKİSİ, UKMK 2014, Osmangazi Üniversitesi, 10-12 Eylül 2014.
  7. Hatice Tuğba ÇELİK, Tuğçe Nur KARAMETE, Serhat EKİNCİ, Metin GÜRÜ, SÜPERKRİTİK CO2 EKSTRAKSİYONU İLE Prinus spinosa ÇEKİRDEĞİNDEN FİTESTEROL ELDESİ, UKMK 2014, Osmangazi Üniversitesi, 10-12 Eylül 2014.
  8. Metin Gürü, Önceliklerimiz içerisinde Orman Yangını ile Mücadele, Orman Genel Müdürlüğü, Vogeoue Oteli 14-18 Nisan 2014, Antalya.
  9. Metin Gürü, Bilimsel Dergilerimiz ve Uluslararası İndekslerdeki yeri, Bilimsel Dergilerimiz ve Uluslararası İndekslerdeki yeri Çalıştayı, Gazi Üniversitesi Mimar Kemaleddin Salonu, 12.3.2013, Ankara.
  10. Metin Gürü, Cumhuriyet Döneminde Sanayi Gelişimi, İTÇ 2012-III. İleri Teknolojiler Çalıştayı ve Sergisi, İTÇ 2012 Bildiri Kitabı Bahçeşehir Üniversitesi, 4-6 Ekim 2012 TÜYAP -İstanbul.
  11. Metin Gürü, Gülsün AKTAŞ, Ali Rıza AKTAŞ, DEMİR ESASLI RADAR ABSORPSİYON MALZEMESİ ÜRETİMİ, İTÇ 2012-III. İleri Teknolojiler Çalıştayı ve Sergisi, İTÇ 2012 Bildiri Kitabı Bahçeşehir Üniversitesi, 4-6 Ekim 2012 TÜYAP -İstanbul.
  12. Mustafa Serhat EKİNCİ, Metin Gürü, Kavun Çekirdeklerinden Uçucu Yağların Süperkritik Karbon Dioksit İle Özütlenmesi, Koç üniversitesi, 10. Ulusal Kimya Mühendisliği Kongresi, UKMK 10-3-6 Eylül 2012- İSTANBUL.
  13. Metin Gürü, Çetin Çakanyıldırım, SÜREKLİ HİDROJEN ÇEVRİMİ AMACI İLE NaBH4 KULLANIMI; OLASI SORUNLAR VE ÇÖZÜM YÖNTEMLERİ, İTÇ 2011-II. İleri Teknolojiler Çalıştayı ve Sergisi, İTÇ 2011 Bildiri Kitabı 89-106, Bahçeşehir Üniversitesi, 9 Aralık 2011, Şişli-İstanbul.
  14. Meltem Çubuk, Metin Gürü, M.Kürşat Çubuk, Politetrafloroetilen Bileşiğinin Bitümün Reolojik Özelliklerine Etkisi, 9. Kimya Mühendisliği Kongresi, 22-25 Haziran 2010, ANKARA.
  15. Metin Gürü, İbrahim Bilici, Deniz Arslan, Ağır Fuel Oilin Viskozitesinin Sıcaklıkla ve Mangan Katkı Maddeleriyle Değişiminin İncelenmesi, 9. Kimya Mühendisliği Kongresi, 22-25 Haziran 2010, ANKARA.
  16. Metin Gürü, Derya Maraşlıoğlu, Ahmet Biçer, Mekanokimyasal reaksiyonla Titanyum Diborür (TiB2) Sentezi, İTÇ 2010-İleri Teknolojiler Çalıştayı ve Sergisi Bildiri Kitabı, ISBN: 978-605-5857-20-2, SAYFA:59-65, Kocaeli Üniversitesi, 30 Nisan 2010.
  17. Çakanyıldırım, Ç, M.Gürü, İ. Bilici, “Atık demir talaşının boya olarak ekonomiye kazandırılması”, 8. Ulusal Kimya Mühendisliği Kongresi, 26-29 Ağustos 2008, Malatya.
  18. Gürü, M., O. Gürdal, M.K. Çubuk, O. Ermiş, “Manyetik Yastıklı Hızlı Tren Tasarımı ve Projelendirilmesi”, TRODSA 2005 Trafik Ve Yol Güvenliği Kongresi, 349-356, 4-6 Mayıs 2005, Gazi Üniversitesi, ANKARA.
  19. Gürü, M., M. Bilen, A.Mergen, “Sentez Al-MgOAl2O3 Kompozit Malzemenin Karakterizasyonu Ve Zırh Malzemesi Olarak Kullanabilirliği”, T.C. Milli Savunma Bakanlığı Zırh Teknolojileri Sempozyumu, 10-11 Mart 2005.
  20. Yalçın, H., T. Koç ve M. Gürü, "Jeotermal Kaynaklardan Elektrik Üretimi", 5. Enerji ve Enerji Tasarrufu Semineri, 14-15 Ocak 1987, İstanbul.
  21. Alıcılar, A., M. Gürü ve M. Doğan, "Düşük Sıcaklıklı Jeotermal Kaynaklardan Faydalanma Yolları", Fırat Havzası I. Çevre Sempozyumu, 13-15 Ekim 1988, Elazığ.
  22. Gürü, M., "Manganlı Bileşiklerin Fuel-Oil Yakıtına Etkileri", 6. Enerji ve Enerji Tasarrufu Semineri, 11-13 Ocak 1988, İstanbul.
  23. Alıcılar, A., M. Gürü, M. Doğan ve Ş. Dursun, "Katı Atıklardan Enerji Üretimi", 6. Enerji ve Enerji Tasarrufu Semineri, 11-13 Ocak 1988, İstanbul.
  24. Alıcılar, A. ve M. Gürü, "Enerji Politikamız", Türkiye 6. Enerji Kongresi, Dünya Enerji Konseyi, 17-22 Ekim 1994, İzmir.
  25. Gürü, M. ve A. Alıcılar, "Doğal Gaz ve Çevre", Türkiye 6. Enerji Kongresi, Dünya Enerji Konseyi, 17-22 Ekim 1994, İzmir
  26. Murathan, M., A. Alıcılar, M. Gürü, "İzmir - Seferihisar Jeotermal Kaynaklardan İkili Flaş Sistemi ile Elektrik Üretimi için Optimum Flaş Sıcaklıklarının Belirlenmesi", Harran Ü. GAP I. Müh. Kong. Kitabı, 427-431, 1-3 Haziran 1996.
  27. Ar, İ., A. Murathan, A. Alıcılar, M. Gürü, "Sulu Fazdaki Kurşunun Dolgulu Kolonlarda Uzaklaştırılması", Üçüncü Ulusal Kimya Mühendisiği Kongresi, 1-4 Eylül 1998, Atatürk Üniversitesi, Erzurum.
  28. Ünal, E. N. ve M. Gürü, "Organometalik Mangan Katkı Maddesi ile Asfalt - Agrega Adezyonunun Artırılması", Üçüncü Ulusal Kimya Mühendisiği Kongresi, 1-4 Eylül 1998, Atatürk Üniversitesi, Erzurum.
  29. Yalçın, H. ve M. Gürü, "Germencik-Ömerbeyli Jeotermal Kaynaklardan Elektrik Enerjisi Üretiminde Termodinamik Analizlerle Optimum Yöntemin Araştırlması", IV. Kimya ve Kimya Mühendisliği Sempozyumu, 10-12 Haziran 1987, Elazığ.
  30. Murathan, A., M. Gürü, G. Özkan, "Atık Sulardan Civanın Uzaklaştırılması", XIII. Ulusal Kimya Kongresi, 31 Ağustos - 4 Eylül 1999, Ondokuz Mayıs Üniversitesi, Samsun.
  31. Gürü, M. ve arkadaşları, "Şeker Pancarı Melasından Nitrik Asitle Okzalik Asite Yükseltgenmesinde Optimum Şartların Belirlenmesi", VII. Kimya ve Kimya Mühendisliği Sempozyumu, 2-5 Nisan 1991, Gazimağusa - Kıbrıs.
  32. Gürü M, Arslan Ş.F.S., Çakanyıldırım Ç.,  Tufanbeyli linyitlerindeki yanabilir kükürdün nitrik asit çözeltisiyle uzaklaştırılması“, GAP V. Mühendislik Kongresi Bildiriler Kitabı, s. 443-448, 26-28 Nisan 2006, Harran Üniversitesi, Şanlıurfa.
  33. Gürü M., Akın E., Akyüz Y., Özçelik E., Dilsiz N.,  Mermer Tozlarının ve Hurda Termoplastiklerin Polimer Kompozit Malzeme Üretiminde Değerlendirilmesi“, GAP V. Mühendislik Kongresi Bildiriler Kitabı, s. 247-252, 26-28 Nisan 2006, Harran Üniversitesi, Şanlıurfa.
  34. Üncü, SE., T.Kıyak, M.Gürü, Kolofonun çelikli ve çeliksiz beton korozyonuna etkisi, 7. Elektrokimya Günleri Özet Kitabı s. 77, Hacettepe Üniversitesi Fen Fak. Kimya Bölümü, 28-30 Haziran 2006, ANKARA.
  35. İbrahim Bilici, Metin Gürü, "Ayçiçeği saplarından üre-formaldehit esaslı kompozit malzeme üretimi“, UMES’07 Kongre kitabı 513-515, Kocaeli Üniversitesi, 20-22 Haziran 2007, KOCAELİ